MarylandBusinessesNear Me
How Much Does Pressure Washing Cost in Baltimore, MD?
← All Posts

pressure-washing

How Much Does Pressure Washing Cost in Baltimore, MD?

Baltimore, MD pressure washing runs about $200 to $450 for a rowhouse front. See prices for Formstone, marble steps, rooftop decks, and city neighborhoods.

·October 21, 2026·9 min read

How Much Does Pressure Washing Cost in Baltimore, MD?

Baltimore has a building material most of the country has never heard of. Formstone, the molded cement facing pressed onto thousands of rowhouses in the middle of the last century, still covers whole blocks in Highlandtown, Hampden, and parts of South Baltimore. It cleans differently than brick or vinyl, and that is one reason Baltimore, MD pressure washing quotes can vary so much from one house to the next.

For a typical two-story rowhouse front, most homeowners pay roughly $200 to $450. A full wash that covers the front, the rear wall, a small yard, and the back steps tends to run about $350 to $700. Detached houses in neighborhoods like Roland Park cost more, often $500 to $1,200, because there is simply more surface to clean.

What Baltimore Homeowners Pay, Job by Job

Per square foot, local crews generally charge somewhere around $0.20 to $0.50 for siding and masonry and $0.15 to $0.40 for concrete flatwork. Few companies will roll a truck for less than about $175 to $250, so tiny jobs are better bundled.

These approximate ranges cover the work people ask for most often in the city:

JobTypical Price Range
Rowhouse front facade, two stories$200 to $450
Rowhouse front and rear, plus yard$350 to $700
Three-story rowhouse in Federal Hill or Canton$400 to $800
Detached home, Roland Park or similar$500 to $1,200
Rooftop deck, composite or wood$250 to $600
White marble steps, hand cleaning$75 to $200
Rear concrete pad or alley parking$125 to $275
Wood deck wash and brightener$250 to $500

Sealing, staining, and repainting are separate jobs. A deck wash that turns into a deck stain can easily double the final bill.

Chesapeake Humidity and the Green Film on North Walls

Summers in Baltimore are hot and sticky, and the moisture coming off the harbor and the bay keeps shaded surfaces damp for days. That steady humidity feeds green algae, black mildew, and moss, especially on north-facing rear walls and in narrow alleys where the sun never reaches. Many rowhouse owners notice the back of the house looks far worse than the front.

Algae is a living growth, so blasting it off with water alone only buys a few months. Good crews apply a soft wash solution that kills the growth at the root, then rinse at low pressure. That approach costs a bit more per visit and holds up much longer.

Most Baltimore homes benefit from a wash every one to two years. Houses shaded by big trees in Roland Park or on the slopes of Hampden may need it every year.

Formstone, Brick, and Marble Each Need Something Different

The surface on your house matters more than the square footage. A crew that treats every wall the same way is a crew that will eventually break something.

Baltimore's older homes mix three main materials on street-facing walls. Each one has its own risks and its own price.

Formstone Facades

Formstone is a cement-based coating textured and tinted to look like stone. It holds dirt in its rough surface and in the fake mortar lines, and it can be brittle where it has cracked or pulled away from the brick underneath. High pressure aimed at a loose section can knock chunks loose and let water behind the coating.

A careful contractor will walk the facade first, point out any cracks or hollow spots, and wash those areas gently. Expect a Formstone front to cost about the same as brick, with a small premium if the crew has to work around damage.

Painted and Unpainted Brick

Plenty of Federal Hill and Fells Point rowhouses have exposed red brick from the 1800s. Old brick and soft lime mortar wear away under a narrow, high-pressure spray, and the damage is permanent. Low pressure with a masonry cleaner is the standard for these walls.

Painted brick is a separate case. Washing can loosen paint that is already failing, so a good crew will warn you about peeling areas before they start.

Marble Steps

Those white marble steps are part of what makes a Baltimore rowhouse look like a Baltimore rowhouse. Marble is soft and reacts badly to acid, so harsh cleaners and high pressure can etch, pit, or yellow it. Many owners still clean steps the old way, with a mild abrasive cleanser, a brush, and plenty of water.

If you hire it out, ask for hand cleaning or very low pressure with a neutral cleaner. Expect to pay about $75 to $200 for a typical set of front steps, more if there are deep stains or rust marks from railings.

Neighborhood by Neighborhood

Prices do not change much across city lines, but the type of work does. Access, height, and building materials vary from one part of town to the next.

A crew pricing a job in Baltimore will ask where the house is before quoting. Street parking, alley access, and whether the facade is Formstone, painted brick, or wood siding all change how long the job takes.

Canton

Canton is full of brick and Formstone rowhouses, many with rooftop decks added in the last 20 years. Street parking is tight, and crews often have to run hoses through the house or up from the alley to reach the roof. That extra setup usually adds $50 to $150 to a deck job.

Federal Hill

Three-story brick rowhouses and steep, narrow streets define this area. Taller facades push prices toward $400 to $800 for a front and rear wash. Rooftop decks with harbor views are common, and the composite boards on them collect a gray film from city grime.

Hampden

Hampden mixes Formstone rowhouses with frame houses that have front porches and wood or vinyl siding. Porch ceilings, railings, and steps add time to the job. A rowhouse with a covered porch might cost $275 to $525 for the front alone.

Roland Park

This is where Baltimore's detached homes show up: large shingle and stucco houses, slate roofs, stone walls, and mature trees. The shade keeps walls damp, so mildew is a constant. Full house washes here often reach $700 to $1,200, and owners should make sure the crew keeps cleaning solution away from slate and old wood shingles.

Rooftop Decks Have Their Own Price Tag

A rooftop deck looks like a simple flat surface, but it is often the hardest part of a rowhouse to clean. Crews have to haul equipment up interior stairs or ladders, protect the roof membrane underneath, and make sure water drains to the gutters rather than over the parapet onto the neighbor's deck.

Most rooftop deck washes in Canton and Federal Hill run roughly $250 to $600. Composite boards clean with low pressure and a mild solution, while wood decks may need a brightener afterward.

One thing to confirm: the crew should not let high-pressure water hit roof flashing or seams. A leak caused by a careless wash can cost far more than the cleaning itself.

Runoff, the Harbor, and the Bay

Baltimore storm drains lead to the Jones Falls, the harbor, and eventually the Chesapeake Bay. The city does not allow wash water carrying detergents, paint chips, or other pollutants to go into storm drains, and the bay's water quality is a big local concern. Responsible crews cover nearby drain inlets and use biodegradable cleaners.

Ask where the water will go before the job starts. On a rowhouse block with no yard in front, the answer matters.

Alley access is the other local wrinkle. Many crews reach the back of a rowhouse through a shared alley, and a trash pickup day or a parked car can stall the job for an hour. Scheduling midweek mornings, when alleys tend to be clearer, can keep the visit shorter and the bill closer to the quote.

Choosing a Baltimore Pressure Washing Company

Maryland does not have a separate state license just for pressure washing. If the job grows to include deck repair, sealing, or painting, ask whether the company holds a Maryland Home Improvement Commission license, since that type of work usually falls under MHIC rules.

Either way, ask for proof of liability insurance and a written quote that lists the surfaces and the cleaning method. The list below covers the questions worth asking any company:

  • Will you use soft wash or high pressure on my Formstone, brick, or marble?
  • How will you reach the rooftop deck and protect the roof underneath?
  • What will you do to keep runoff out of the storm drain?
  • Is a deck brightener or sealer included, or priced separately?

You can compare local providers through our Baltimore pressure washing company listings. For more home cost breakdowns around the state, browse the rest of our homeowner guides on the blog.

Frequently Asked Questions

How much does it cost to pressure wash a Baltimore rowhouse?

A front facade usually costs about $200 to $450, and a front and rear wash with a small yard runs closer to $350 to $700. Three-story homes in Federal Hill and Canton sit at the higher end.

Can Formstone be pressure washed?

Yes, with low pressure and a cleaning solution. Cracked or hollow sections can break off under a strong spray, so a crew should check the facade first and work gently around any damage.

What is the best way to clean white marble steps?

Gentle hand scrubbing with a mild, non-acidic cleaner works best, which is how Baltimore families have cleaned stoops for generations. A pro will charge roughly $75 to $200, and acid-based products should be avoided because they etch the stone.

How often should I wash my house in Baltimore?

Every one to two years for most rowhouses. Shaded rear walls and homes under big trees in Roland Park often need a yearly soft wash to keep algae from coming back.

Is it cheaper to wash a rooftop deck myself?

It can be, but hauling a rented machine up three flights is no small task, and high pressure near roof flashing risks a leak. Many Canton owners decide the $250 to $600 professional price is worth it.